Items where Subject is "T Technology > TS Manufactures"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | F | M | P | R | S | T
Number of items at this level: 37.

A

Akhmad, Al Antoni (2010) FOCUSED ION BEAM MICROMACHINING. Jurnal Rekayasa Sriwijaya, 19 (2). pp. 61-69. ISSN 0852-5366

Akhmad, Al Antoni (2009) PEMANFAATAN PROGRAM OPEN SOURCES UNTUK PENGEMBANGAN SISTEM INFORMASI PENDIDIKAN BERBASIS WEB JURUSAN TEKNIK MESIN. PROSIDING SNTTM VIII SEMARANG. pp. 248-259. ISSN 978-979-704-772-6

Akhmad, Al Antoni (2009) PERANCANGAN SIMULASI SISTEM PERGERAKAN DENGAN PENGONTROLAN PNEUMATIK UNTUK MESIN PENGAMPLAS KAYU OTOMATIS. Jurnal Rekayasa Sriwijaya, 3 (18). pp. 21-28. ISSN 0852-5366

Akhmad, Al Antoni and Mohruni, Amrifan Saladin and Zulkarnain, Zulkarnain (2011) Pembuatan Alat Bantu Pengukuran Geometri dan Toleransi pada Coordinate Measuring Machine. In: Seminar Nasional AVoER 3, 26-27 Oktober 2011, Palembang.

Arifin, Amir (2014) HA/Ti6Al4V Powder with Palm Stearin Binder System - Feedstock Characterization. Applied Mechanics and Materials, 564. pp. 372-375.

Arifin, Amir (2015) Powder injection molding of HA/Ti6Al4V composite using palm stearin as based binder for implant material. Materials & Design, 65. pp. 1028-1034. ISSN 02613069

Arifin, Amir (2014) Stainless steel 316L–hydroxyapatite composite via powder injection moulding:rheological and mechanical properties characterisation. Materials Research Innovations, 18 (S6). S6-100-S6-104. ISSN 1432-8917

Arifin, Amir and Sulong, Abu Bakar and Muhamad, Norhamidi and Syarif, Junaidi and Ramli, Mohd Ikram (2014) Material processing of hydroxyapatite and titanium alloy (HA/Ti) composite as implant materials using powder metallurgy: A review. Materials & Design, 55. pp. 165-175. ISSN 02613069

F

Felixon, Kandy (2011) PENELITIAN TERHADAP PENGEMBANGAN PENGGUNAAN MATERIAL PLASTIK (POLIKARBONAT) PADA SELUBUNG BANGUNAN. In: Prosiding Seminar Nasional AVoER ke-3. Fakultas Teknik Universitas Sriwijaya, Palembang, pp. 116-124. ISBN 979-587-395-4

M

Mohruni, Amrifan Saladin (2008) Performance Evaluation of Uncoated and Coated Carbide Tools When End Milling of Titanium Alloy using Response Surface Methodology. PhD thesis, Universiti Teknologi Malaysia.

Mohruni, Amrifan Saladin (2005) Performance Evaluation of uncoated and TiCN coated Carbide Tools when End Milling of Titanium Alloy Ti-6Al-4V. In: The 8th International on Quality in Research 2005, 9 - 10 August 2005, Jakarta, Indonesia.

Mohruni, Amrifan Saladin (2005) Performance Evaluation of uncoated and TiCN coated Carbide Tools when End Milling of Titanium Alloy Ti-6Al-4V. In: 8th International Conference Quality in Research QiR UI 2005, 9-10 August 2005, Jakarta, Indonesia.

Mohruni, Amrifan Saladin (2001) Studi Eksperimental Pelapisan Logam Chromium (Hard Chromium Plating) dengan Variasi Parameter Proses. Proceeding of The 4th Quality in Research Seminar, VII (2). pp. 1-10. ISSN ISSN 1411-1284

Mohruni, Amrifan Saladin (2001) Studi Eksperimental Peningkatan Kualitas Proses Bor (High Speed Cutting Process) pada Bermacam-macam Baja. Proceeding of The 4th Quality in Research Seminar, VII (2). pp. 1-10. ISSN 1411-1284

Mohruni, Amrifan Saladin and Sharif, S and Isa, M (2006) Investigation The Surface Integrity of Uncoated and TICN coated Carbides Tools when End Milling of Titanium Alloy TI-6AL-4V. In: National Scientific Meeting of Indonesians Engineering Lecturer (PNDT 2006), 5 - 6 September 2006, Jakarta, Indonesia.

Mohruni, Amrifan Saladin and Sharif, S and Noordin, MY (2006) Cutting Force Predictions Models in End Milling Titanium Alloy Ti-6Al-4V. In: Regional Postgraduate Conference on Engineering & Science, 26 - 27 July 2006, Johor Bahru, Malaysia.

Mohruni, Amrifan Saladin and Sharif, S and Noordin, MY (2008) Mathematical Modeling of Cutting Force in End Milling Ti-6Al4V using TiAlN Coated Carbide Tools. In: International Conference on Mchanical & Manufacturing Engineering (ICME2008), 21 - 23 May 2008, Johore Bahru, Malaysia.

Mohruni, Amrifan Saladin and Sharif, S and Noordin, MY and Ardiansyah, A (2009) Utilization of Genetic Algorithm for Cutting Force Optimization when Machining Ti-6Al-4V using TiAlN coated End Mills. In: The 4th National Seminar on Mechanical Engineering (SNTM4), 30 June 2009, Surabaya, Indonesia.

Mohruni, Amrifan Saladin and Sharif, S and Noordin, MY and Faizal, H (2009) Optimization of Surface Roughness in End Milling Ti-6Al-4V using TiAlN coated Tools by Utilizing Genetic Algorithm. In: Seminar on Application and Research in Industrial Technology, SMART, 22 July 2009, Yogyakarta, Indonesia.

Mohruni, Amrifan Saladin and Sharif, S and Noordin, MY and Hanson, R (2011) Optimization of Cutting Conditions when End Milling Aeronautic Materials (Ti-6Al-4V) using Genetic Algorithm and Response Surface Methodology. In: The 12th International Conference on QiR (Quality in Research), 4 - 7 July 2011, Denpasar Bali, Indonesia.

Mohruni, Amrifan Saladin and Sharif, S and Noordin, MY and Santo, PS (2009) Implementation of Genetic Algorithm in Tool Life Optimization when End Milling of Ti64 using TiAlN Coated Tools. In: The 8th National Seminar of Mechanical Engineering (SNTTM VIII), 11 - 14 August 2009, Semarang, Indonesia.

Mohruni, Amrifan Saladin and Sharif, S and Noordin, MY and Venkatesh, VC (2007) Application of Response Surface Methodology in the Development of Tool Life Prediction Models when End Milling Ti-6Al4V. In: The 10th International Conference on Quality in Research (QIR), 4 - 6 December 2007, Jakarta, Indonesia.

Mohruni, Amrifan Saladin and Sharif, S and Noordin, MY and Venkatesh, VC (2006) Investigation of Optimum Cutting Condition when End Milling Titanium Alloy Ti-6Al-4V. In: The 9th International Conference on Quality in Research (QIR), 6 - 7 September 2006, Jakarta, Indonesia.

Mohruni, Amrifan Saladin and Sharif, S and Noordin, MY and Venkatesh, VC (2007) Optimization of Surface Roughness when End Milling Ti-6Al4V using TiAlN Coated Tool. In: The 10th International Conference on Quality in Research (QIR), 4 - 6 December 2007, Jakarta, Indonesia.

Mohruni, Amrifan Saladin and Suparman, D (2012) Mathematical modeling for turning on steels using Response Surface Methodology. In: The 11th Annual Seminar on Mechanical Engineering (SNTTM XI) by Indonesian Society of Mechanical Engineers, 16 - 17 October 2012, Yogyakarta, Indonesia.

Mohruni, Amrifan Saladin and Yanis, Muhammad and Sundari, Ella and Budiman, Arie Yudha and Martomi, Eka Satria (2015) Mathematical Modelling of Surface Roughness on Tropical Wood Machining using Response Surface Methodology. Applied Mechanics and Materials, 815. pp. 313-317. ISSN 1660 9336

P

Passarella, Rossi and Taha, Zahari (2012) Lightweight Solar Vehicle Impact Analysis Using ABAQUS/EXPLICIT. Computer Engineering and Applications Journal, 1 (2). ISSN 2252-4274

R

Rahim, EA and Sharif, S and Mohruni, Amrifan Saladin and Syed, IA (2005) Machinability Investigation when Drilling Titanium Alloys. In: International Conference on Leading Edge Manufacturing in 21st Century, 19 - 22 October 2005, Nagoya, Japan.

S

Sharif, S and Mohruni, Amrifan Saladin and Jawaid, A (2008) Face Milling of Titanium Alloy Ti-6246 Using PVD-TiN Coated Carbide Tools,In:Advances In Manufacturing and Industrial Engineering 2008. In: Advances In Manufacturing and Industrial Engineering 2008. Universiti Teknologi Malaysia, Johore, Malaysia, pp. 203-218. ISBN 978-983-52-0551-4

Sharif, S and Mohruni, Amrifan Saladin and Noordin, MY (2006) Modeling of tool life when end milling on titanium alloy (Ti-6Al-4V) using respons surface methodology. In: The 1st International Conference on Manufacturing and Material Processing & 7th AUN/SEED-Net Filedwise Seminar, 14 - 15 March 2006, Kuala Lumpur, Malaysia.

Sharif, S and Mohruni, Amrifan Saladin and Noordin, MY and Venkatesh, VC (2006) Optimization of Surface Roughness Prediction Model in End Milling Titanium Alloy (Ti-6Al4V). In: International Conference on Manufacturing Science and Technology, 28 - 30 August 2006, Melaka, Malaysia.

Sharif, S and Rahim, EA and Mohruni, Amrifan Saladin and Jawaid, A (2007) Effect of Edge Geometry on PVD-TiN Coated Carbide Tools when Face Milling Titanium Alloy, Ti-6246. In: The 4th International Conference on Leading Edge Manufacturing in 21st Century, 7 - 9 November 2007, Fukuoka, Japan.

Sharif, Safian and Mohruni, Amrifan Saladin (2005) Performance Evaluation of uncoated and TiCN coated Carbide Tools when End Milling of Titanium Alloy Ti-6Al-4V. In: The 8th International on Quality in Research, 9 - 10 August 2005, Jakarta, Indonesia.

Sulong, Abu Bakar and Arifin, Amir and Harun, Zambri (2016) Jig Prototype for Computer-Assisted Total Knee Replacement and Its Flow Simulation. International Journal of Technology, 7 (1). pp. 132-140. ISSN 2086-9614

Syarif, Nirwan and Prasagi, Miswar (2016) Preparation of carbon nanosheets from Gelam wood bark and its electrochemical study. Carbon Science and Technology, 8 (4). pp. 35-42. ISSN 09740546

T

Taha, Zahari and Passarella, Rossi and Abd Rahim, Nasrudin and Ahmad-Yazid, Aznijar and Md Sah, Jamali (2010) Development of a Solar Car. In: Asia Pacific Industrial Engineering and Management Society, 7-10 December 2010, Melaka, Malaysia.

Teguh Budi, SA and Mohruni, Amrifan Saladin and Arifin, A (2011) Studi Eksperimental Optimalisasi Campuran Bahan Bakar Solar dengan Crude Jatropha Oil (CJO) Terhadap Karakteristik Motor Diesel Didacta Italia Test Bed T 85 D. In: The 10th Annual National Seminar of Mechanical Engineering (STTM X), 2 - 3 November 2011, Malang, Indonesia.

This list was generated on Thu Mar 30 09:51:08 2017 WIT.